cleaning vinyl records 2

How to Clean a Vinyl Record

A surfactant is a solvent used to clean the surface of the record. There are surfactants made specifically for cleaning records, and you should pick some up if you are serious about cleaning your records. If you can’t get it, you can make your own by mixing a weak solution of rubbing alcohol with water. Or you can use a weak mixture of soap and water. The problem with the soap and water is that it should be rinsed off afterwards. Also, make sure to use distilled water. 

To actually remove the dirt, you will use a brush or microfiber cloth with the surfactant. The record cleaning industry has a couple of different brushes that work well for cleaning a record. It is best to use one of the recommended velvet or carbon fiber brushes or a microfiber cloth to clean vinyl. 

The brush works by plowing the dirt off the record. So put the record on the turntable and drop a couple drops of record cleaner on the record. Turn on the turntable and place the brush on the record. Once the record has rotated a couple times, slowly pull the brush away from the center until it is completely off the record. The dirt will keep going towards the edge until the brush is off. Once the brush is off, you will notice some dirt stuck to it. Use a stiff brush to remove that and continue until you believe you have removed all of the dirt. This method works well for relative light cleaning. 

For much dirtier situations, you will have to try something a little more intensive. Occasionally you will find an old record with a serious stain or goo stuck to it. These records are usually super cheap, like 50 cents. So, if you can get the stuff off, you will have made a great find. If not, well, at least you are only out 50 cents. You are banking on this stuff being water soluble. If it’s not, you may as well give up. Use room temperature distilled water and soap to try and dissolve the stain/goo. 

If you are successful in removing the junk, rinse the record with distilled water and air dry. Once the record is dry, it may be a good idea to give it a once over with a cleaner and brush. Or, if you have it, a record preservative. 

It is very apparent to me that the record cleaning machine is by far the best way to clean a record. It is without a doubt the preferred method by record enthusiasts. The machine works so well because it uses suction to remove the dirt. There are several different models available, and they range in price form a couple hundred to a thousand bucks. Most people recommend buying the basic model and getting it used, if you can. If you are really into records and or sell them, this machine is what you want. 

Tips for Keeping Your Vinyl Clean

  • 1. Replace dirty sleeves with new ones.
  • 2. Store records in plastic dust jackets.
  • 3. Store records in a closed cabinet.
  • 4. Keep your record player clean.
  • 5. Keep your turntable covered.
  • 6. Keep your stylus clean and replace it when necessary.
  • 7. Don’t touch the record with your fingers.
  • 8. Keep your slip mats clean.
  • 9. Clean your new records frequently to keep them from getting dirty.
This entry was posted in cleaning vinyl records and more and tagged . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s